# Loom Multi Cheat Installation Guide

> By cheats.org on 2026-11-20

Source: https://cheats.org/wiki/loom-cheat-installation-guide

# Setup Guide

> ⚠️ **Before you start — please read.**
> This software requires **Secure Boot** and **HVCI (Memory Integrity)** to be turned off.
> These are Windows security features. You can turn both back on at any time (see the end of this guide).

---

## Requirements

- Windows 10 or Windows 11
- Administrator access to your PC
- A few minutes and one reboot

---

## 1. Download the loader



Once downloaded, leave it somewhere easy to find (e.g. your Desktop or Downloads folder). Don't run it yet — complete the steps below first.

---

## 2. Complete the setup requirements

You need to turn off **two** things: Memory Integrity (HVCI) in Windows, and Secure Boot in your UEFI/BIOS.

### 2a. Turn off Memory Integrity (HVCI)

1. Press the **Windows key**, type **Core isolation**, and open it.
2. Find **Memory integrity** and toggle it **Off**.
3. When prompted, allow the change. **Restart if Windows asks** — you can combine this with the reboot in Step 3.

### 2b. Turn off Secure Boot

Secure Boot is turned off in your PC's firmware (UEFI/BIOS):

1. Go to **Settings → System → Recovery**.
2. Under **Advanced startup**, click **Restart now**.
3. After restart, choose **Troubleshoot → Advanced options → UEFI Firmware Settings → Restart**.
4. In the firmware menu, open the **Boot** or **Security** tab (wording varies by manufacturer).
5. Set **Secure Boot** to **Disabled**. (sometimes set to Other OS)
6. **Save and exit** (usually the **F10** key).

> 💡 Can't find the setting, or it's greyed out? See **Troubleshooting** below.

### Confirm it worked

After rebooting, press **Windows + R**, type `msinfo32`, and press Enter.
- **Secure Boot State** should read **Off**
- **Virtualization-based security** should read **Not enabled** (or Memory Integrity off)

---

## 3. Reboot

Fully restart your PC so both changes take effect. A full shutdown and power-on is best.

---

## 4. Enjoy

Run the Loader and listen to instructions, after your next reboot just open your game!

---

## Troubleshooting

- **Secure Boot option is greyed out:** Set a BIOS/UEFI supervisor password first, or switch the Secure Boot mode to "Custom," then disable it.
- **Can't get into the BIOS menu:** Restart and tap your manufacturer's key repeatedly during boot — commonly **Del**, **F2**, **F10**, or **F12**.
- **Memory Integrity won't turn off / says a driver is incompatible:** Follow the on-screen prompt to resolve the driver, then retry.
- **BitLocker recovery screen after changing Secure Boot:** This is normal. Have your BitLocker recovery key ready (find it at **account.microsoft.com/devices/recoverykey**) before you start.

---

## How to re-enable protection later

When you no longer need the software, it's good practice to turn these back on:

1. **Secure Boot:** Repeat Step 2b, but set Secure Boot to **Enabled**.
2. **Memory Integrity:** Go to **Windows Security → Device security → Core isolation** and toggle **Memory integrity** back **On**. Reboot.
